Request a quote on stock# L215010| Specification | Description |
|---|---|
| Control Retrofitted In the | OT |
| Swing Over Ways | 28" |
| Swing Over Cross Slide | 15" |
| Center Distance | 80" |
| Bed Width | 19" |
| Cross Slide Width | 12-1/2" |
| Spindle Nose | A - 8 |
| Spindle Thru Hole | 4-1/4" |
| Spindle Speeds (2) Gear Ranges | 6 To 1,000 Rpm's |
| Chuck Size | 15" 3 - Jaw |
| Front Turret Horizontal | 4 Position |
| Rear Turret Vertical | 6" Position |
| Rapid Traverse | 200 I.P.M. |
| Machine Main Motor | 35 Hp |
| Machine Weight | 14,000 Lbs. |
| Tail Stock Quill Diameter | 4" |
| Tail Stock Quill Travel | 4" |
| Tail Stock Quill Taper | # 5 Morse |
| Tail Stock Travel | Hydraulic |
| Machine Chip Pan & Coolant | Yes |
| Hardened & Ground Ways | Yes |
| Hardened & Ground Ball Screws | Yes |
| Note: In Plant Under Power. As Removed From | |
| Service. | |
| Condition | Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
979 885 2449
979 885 2463
sales@nrmachinesales.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers