Request a quote on stock# L215014| Specification | Description |
|---|---|
| Control | Fanuc 0T With CRT |
| Swing Over Ways | 24" |
| Swing Over Cross Slide | 13" |
| Center Distance | 60" |
| Spindle Nose | A - 11 |
| Spindle Thru Hole | 4.1" |
| Spindle Speeds (3) Gear Ranges | 3 To 1,000 Rpm's |
| Chuck Size | 18" 4-Jaw |
| Front Turret | Octagonal Disc |
| Rear Turret | Hexagon Turret |
| Rapid Traverse | 400 I.P.M. |
| Machine Main Motor | 30 Hp. |
| Machine Weight | 13,000 Lbs. |
| Floor Space | 144" X 72" |
| Machine Height | 80" |
| Tail Stock Quill Diameter | 4" |
| Tail Stock Quill Travel | 4" |
| Tail Stock Quill Taper | # 5 Morse |
| Tail Stock Hydraulic Actuated | Hydraulic |
| Machine Chip Pan & Coolant | Yes |
| Hardened & Ground Ways | Yes |
| Chip Conveyor | Yes |
| Note | As Removed From Service |
| Condition | Very Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
979 885 2449
979 885 2463
sales@nrmachinesales.com