| Specification | Description |
|---|---|
| Control | Yasnuc 2000 G II |
| Max. Travel | 9-1/4" |
| Swing Over Ways | 18" |
| Center Distance | 100" |
| Bed Width | 16-1/8" |
| Spindle Nose | A-8 |
| Spindle Thru Hole | 3" |
| Spindle Speeds | 17 To 1,400 Rpm's |
| Chuck Size | 12" 3 Jaw |
| Front Turret | 8 |
| Rapid Traverse | 200 I.P.M. |
| Machine Main Motor | 30 HP. |
| Machine Weight | 12,100 Lbs. |
| Lathe Dimensions | 5' W X 7' T X 16' L |
| Tail Stock Quill Diameter | 4" |
| Tail Stock Quill Travel | 6" |
| Tail Stock Quill Taper | # 5 Morse |
| Tail Stock Travel | Hydraulic |
| Steady Rest 6-1/2" Cap | Yes |
| Machine Chip Pan, Coolant & Chip Conveyor | Yes |
| Hardened & Ground Ways | Yes |
| Hardened & Ground Ball Screws | Yes |
| Note: Machine Has Just Been Removed From | |
| Service. | |
| Condition | Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com