Request a quote on stock# D41506| Specification | Description |
|---|---|
| Standard Bolt Circle Range | 4" To 30" |
| Standard Division Of Equal Spaced Holes | 4,5,6,8,10,12,16,20,&24 |
| Max. Diameter Of Work Piece ( Swing ) | 33" |
| Max. O.D. Chucking With Standard Jaws | 26" |
| Max. I.D. Chucking With Standard Jaws | 33" |
| Centerline Of Chuck To Front & Rear Of machine | 23" & 55" |
| Drilling Capacity In Carbon Steel | 2-1/8" |
| Spindle Stroke Maximum | 6" |
| Spindle Speeds | 90 To 500 Rpm's |
| Spindle Taper | 5 MT |
| Cushman Chuck Air Operated | 15" 3-Jaw |
| Maximum Table Weight With Support Rings | 1,500 Lbs |
| Main Motor | 10 Hp. |
| Machine Height | 133" |
| Machine Width | 50" |
| Machine Weight | 5,600 Lbs |
| Tachometer For Spindle Speeds | Yes |
| Coolant Pump | Yes |
| Splash Guards | Yes |
| Support Ring With Covers | Yes |
| Note: Machine Has Been Cleaned, Painted And | |
| Cycled. | |
| Condition | Very Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com