Request a quote on stock# G11001| Specification | Description |
|---|---|
| Max. Diametral Pitch & Diameter In Steel One Cut | |
| 6 DP | 4.5" |
| 7 DP | 6" |
| 8 DP | 8" |
| 10 DP | 10" |
| Max. Rated Workpiece Diameter, Single Cut In Steel | 10" |
| Max. Rated Face Width | 12" |
| Ma. Travel Of Hob Slide | 17" |
| Max. Dist. Face Of Work Spindle To Tail Center | 50" |
| Max. Dist. C/L Work Spindle To C/L Hob Spindle | 8.75" / .75" |
| Distance From C/L Work Spindle To Surface Of | 8" |
| Max. Hob Diameter | 5" |
| Diameter Of Work Spindle Bore | 3.125" |
| Hob Slide Swivel- Degrees Left To Right | 50 |
| Hob Spindle Speeds | |
| ( When Equipped W / Suitable Gears) | 6 To 240 Rpm's |
| 22 Feeds IPR Of Work | |
| ( When Equipped W / Suitable Gears) | .015 To .150 |
| Floor Spacew L X W X H | 83" X 45" X 75" |
| Weight | 6,000 Lbs. |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com