Request a quote on stock# G480011| Specification | Description |
|---|---|
| Maximum Swing | 10" |
| Maximum Distance Between Centers | 22" |
| Wheel Head Spindle Speeds (3) | 2100, 2400 & 2800 |
| Grinding Wheel Size | 12"X1"X5" |
| Grinding Wheel Width | 3/8" |
| Wheel Head Swivels Towards | 90 Degrees |
| Work Head Spindle Speeds | 60 To 600 Rpm's |
| Work Heads Spindle Nose | A2-5 |
| Work Head Swivels | 90 Degrees |
| Table Traverse Speed Variable | 3 To 150 IPM |
| Table travel Slow | .1 |
| Table Travel Fast | 1.5 |
| Dwell At Each End | 0 To 2-1/2 Seconds |
| Table Swivel Towards | 8-1/4 Degrees |
| Scales Taper Per Foot | 3-1/2" |
| Tail Stock Type Manual | Hand |
| Tail Stock Taper | # 7 Jarno |
| Tail Stock Quill Travel | 5/8" |
| Wheel Head Motor | 5 Hp |
| Work Head Motor | 3/4 Hp. |
| Weight | 5,100 Lbs |
| Floor Space | 65" X 129" |
| Table Dresser | Yes |
| Note: Machine Came Out Of Reynolds Can Co. | |
| Condition | Very Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com