| Specification | Description |
|---|---|
| Swing Over Bed Ways | 20-1/2" |
| Swing Over Cross Slide Carriage | 16" |
| Center Distance | 43" |
| Spindle Hole | 3-3/4" |
| Spindle Nose | A - 11 |
| Spindle Speeds | 6 To 1117 Rpm's |
| Chuck Size | 15" 3- Jaw |
| Feeds Cross | .0025 To .082 I.P.R. |
| Feeds Long. | .005 To .167 I.P.R. |
| Main Motor | 20 / 40 Hp 440 Volts |
| Flange Holders Short | 3 |
| Flange Holders Long | 1 |
| Slide Tool Holders | 1 |
| Weight | 12,500 Lbs |
| Floor Space | 144" L. X 83" W. |
| Machine Height | 64" |
| Coolant | Yes |
| Tool Post 4 Way On Front Carriages | Yes |
| Rapid Traverse Front & Rear Carriages | Yes |
| Cross Sliding Rear Turret | Yes |
| Power Compound On Front Carriage | Yes |
| Note: Machine Has Been Cleaned, Painted & Cycled | |
| Condition | Very Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com