| Specification | Description |
|---|---|
| Swing Over Bed Ways | 28" |
| Swing Over Cross Slide | 18-1/4" |
| Swing In Gap | 35" |
| Length Of Gap | 12" |
| Bed Way Width | 20-1/2" |
| Center Distance | 120" |
| Spindle Hole | 4-1/8" |
| Spindle Speeds | 10 To 1,500 Rpm's |
| Spindle Nose | D-1-11 |
| Chuck Size | 18" 3-Jaw |
| Feeds Logitudinal | .0018 To .4472 |
| Feeds Cross | .0008 To .1920 |
| Lead Screw Diameter | 2" |
| Lead Screw Pitch | 2 T.P.I. |
| Threads Inch | 1/4 To 60 TPI |
| Threads Metric | .5 To 120 T.P.I. |
| Threads Module | 30 To 125 T.P.I. |
| Thread D.P. | 1 To 240 T.P.I. |
| Tail Stock Quill Diameter | 4-1/4" |
| Tail Stock Quill Travel | 7" |
| Tail Stock Taper | # 6 Morse |
| Tail Stock | 2 Speed |
| Floor Space | 54" X 156" |
| Height | 60" |
| Weight | 12,450 Lbs. |
| Steady Rest | No |
| Coolant Pan | Yes |
| Taper Attachment | Yes |
| Rapid Traverse | Yes |
| Note: Machine Has Been Cleaned, Painted And | |
| Cycled. | |
| Condition | Very Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com