| Specification | Description |
|---|---|
| Swing Over Bed Ways | 34" |
| Swing Over Cross Slide | 23" |
| Center Distance | 96" |
| Spindle Hole | 16.5 |
| Spindle Speeds | 5 To 150 Rpm's |
| Spindle Nose | Lehmann |
| Chuck Size On Front New | 32" 4 Jaw |
| Chuck Size On Rear New | 32" 4-Jaw |
| Feeds | .006 To .640 I.P.R. |
| Threads Inch | 1 To 30 T.P.I. |
| Threads Metric | No |
| Hex Turret On In Place Of Tail Stock | 6 Postions |
| Rapid Traverse | Yes |
| Steady Rest | No |
| Main Motor | 40 Hp. 440 |
| Weight | 25,000 Lbs. |
| Chip Pan | No |
| Taper Attachment On Front & Rear Aprons | Yes |
| Thread Dial | Yes |
| Note: Machine Will Be Cleaned, Painted & Cycled. | |
| New Chucks Will Be Installed, Machine Was | |
| Reconditioned 4 Years Ago And Not Put Back In | |
| Service. | |
| Condition: Very Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com