Request a quote on stock# L410617| Specification | Description |
|---|---|
| Swing Over Bed Ways | 36" |
| Swing Over Cross Slide | 26-7/8" |
| Swing In Gap | 52" |
| Length Of Gap | 17" |
| Bedway Width | 20" |
| Center Distance | 120" |
| Spindle Hole | 13-5/8" |
| Spindle Speeds | 5 To 250 Rpm's |
| Chuck Size With 13-5/8" Hole | 30" 4 Jaw Front |
| Feeds Long. | .0054 To 3198 IPR |
| Feeds Cross | .0023 To 1378 IPR |
| Threads Inch | 1 To 60 TPI |
| Threads Metric | .5 To 7.5 MM |
| Tail Stock Quill Diameter | 6" |
| Tail Stock Quill Travel | 11-13/16" |
| Tail Stock Taper | # 6 Morse |
| Rapid Traverse | Yes |
| Steady Rest | No |
| Main Motor | 25 Hp |
| Weight | 18,000 Lbs. |
| Machine Floor Space | 205 L-R X 63" F-B |
| Machine Height | 65" |
| Chip Pan | Yes |
| Taper Attachment | Yes |
| Thread Dial | Yes |
| Push Button Controls | Yes |
| Note: Machine Has Been Cleaned, Painted And | |
| Cycled. Headstock Is Little Noisy. | |
| Condition | Fair |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com