| Specification | Description |
|---|---|
| Swing Over Bed Ways | 31-3/8" |
| Swing Over Cross Slide Carriage | 24-1/2" |
| Center Distance | 82" |
| Spindle Hole | 12-1/2" |
| Spindle Speeds | 7 To 395 Rpm's |
| Spindle Nose | A-1-20 |
| Chuck Size | 24" 4-Jaw |
| Feeds Cross | .0025 To .88 I.P.R. |
| Feeds Long. | .005 To 176 I.P.R. |
| Main Motor | 60 Hp. 230 / 480 Volts |
| Leadscrew Threading Front & Rear | 3/8 To 36 TPI |
| Flange Holders | 2 |
| Main Motor | 50 Hp |
| Weight | 25,000 Lbs. |
| Floor Space | 238" X 72" X 64" V |
| Taper Attachment on Front & Rear | Yes |
| Longitudinal Dials On Both Carriages | Yes |
| Coolant | Yes |
| Tool Post 4 Way On Front | Yes |
| Cross Sliding Rear Turret | Yes |
| Note: Machine Will Be Cleaned, Painted & Cycled | |
| Condition | Very Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com