Request a quote on stock# L630425| Specification | Description |
|---|---|
| Swing Over Bed Ways | 28-1/4" |
| Swing Over Cross Slide Carriage | 22" |
| Center Distance | 62" |
| Spindle Hole | 9-1/4" |
| Spindle Speeds | 20 To 526 Rpm's |
| Spindle Nose | A-15 |
| Chuck Size | 24" 3 - Jaw |
| Feeds Cross | 4 To .090 I.P.R. |
| Feeds Long. | .005 To .167 I.P.R. |
| Main Motor | 37.5 / 75 Hp. 440 Volts |
| Flange Holders Short | 4 |
| Flange Holders Long | 1 |
| Weight | 25,000 Lbs. |
| Floor Space Right To Left | 214" |
| Floor Space Front To Back | 87" |
| Machine Height | 67" |
| Coolant | Yes |
| Tool Post 4 Way On Front | Yes |
| Power Chuck Wrench | Yes |
| Rapid Traverse Front And Rear | Yes |
| Fixed Rear Turret | Yes |
| Full Chip Pan And Coolant | Yes |
| Note: Machine May Be Seen Under Power. Machine | |
| Has Been Cleaned, Painted And Cycled. | |
| Machine Will Have A Recondition Front Apron And | |
| Carriage Installed On It. Rear Apron And Carriage | |
| Have Been Reconditioned. Both Rapids Boxes Will | |
| Be Recondition. | |
| Condition | Very Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com