Request a quote on stock# L630429| Specification | Description |
|---|---|
| Swing Over Bed Ways | 28-1/4" |
| Swing Over Cross Slide Carriage | 22" |
| Center Distance | 144" |
| Spindle Hole | 9-1/4" |
| Spindle Speeds | 20 To 526 Rpm's |
| Chuck Size | 24" 4 Jaw |
| Feeds Cross | .004 To .090 I.P.R. |
| Feeds Long. | .005 To .167 I.P.R. |
| Main Motor | 25 / 50 Hp. |
| Flange Holders | 4 |
| Weight | 25,000 Lbs. |
| Floor Space Right To Left | 280" |
| Floor Space Front To Back | 87" |
| Machine Height | 67" |
| Coolant | Yes |
| Tool Post 4 Way On Front | Yes |
| Rapid Traverse Front And Rear | Yes |
| Cross Sliding Rear Turret | Yes |
| Full Chip Pan And Coolant | Yes |
| Note: Machine Has Been Cleaned, Painted And | |
| Cycled. May Be seen Under Power. | |
| Both Machine Aprons And Carriage Have Been | |
| Reconditioned And Both Rapid Traverses Have | |
| Been Reconditioned. New Hydraulic Pump, Feed | |
| Shaft And Rapid Shaft. Main Motor Has Been | |
| Reconditioned. | |
| Condition | Very Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com