| Specification | Description |
|---|---|
| Swing Over Bed Ways | 40" |
| Swing Over Carriage Wing | 33" |
| Swing Over Cross Slide Carriage | 26-1/2" |
| Center Distance | 97-1/2" |
| Spindle Nose | A-20 |
| Spindle Hole | 9-1/4" |
| Spindle Speeds | 11 TO 280 Rpm's |
| Chuck Size | 32" 3 Jaw |
| Feeds Cross | .0015 To .044 IPR |
| Feeds Long. | .003 To .088 IRR |
| Flange Holders | 4 |
| Main Motor | 40 Hp. 230 / 480 Volts |
| Taper On Rear Turret | Yes |
| Weight | 35,000 Lbs. |
| Floor Space | 208" X 72" X 64" V |
| Slide Tool Holders | 2 |
| Flange Holders | 2 |
| Steady Rest | 10" Capacity |
| Coolant | Yes |
| Tool Post 4 Way On Front | Yes |
| Rapid Traverse Front And Rear | Yes |
| Fixed Rear Turret | Yes |
| Note: Machine Has Just Been Removed From | |
| Service. | |
| Condition: Good Running, Fair Overall | |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com