| Specification | Description |
|---|---|
| Swing Over Bed Ways | 23-1/2" |
| Swing Over Cross Slide Carriage | 18" |
| Center Distance | 43" |
| Spindle Hole | 4-3/4" |
| Spindle Speeds | 24 To 851 Rpm's |
| Spindle Nose | A-15 |
| Chuck Size | 21" 4-Jaw |
| Feeds Cross | .0025 To .082 I.P.R. |
| Feeds Long. | .005 To .167 I.P.R. |
| Threads | 1 To 36 TPI |
| Main Motor | 25 / 50 Hp. 440 Volts |
| Weight | 15,000 Lbs. |
| Floor Space | 180" L. X 83" W. |
| Machine Height | 64" |
| Flange Holders Short | 3 |
| Flange Holders Long | 1 |
| Flange Holders Tapered | 1 |
| Longitudinal Dials On Both Carriages | Yes |
| Taper Attachment On Both Carriage | Yes |
| Coolant | Yes |
| Tool Post 4 Way On Front | Yes |
| Rapid Traverse Front And Rear | Yes |
| Cross Sliding Rear Turret | Yes |
| Note: Machine Has Been Cleaned, Painted And | |
| Cycled. | |
| Condition | Very Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com