| Specification | Description |
|---|---|
| Swing Over Bed Ways | 28-1/4" |
| Center Distance | 62" |
| Swing Over Cross Slide Carriage | 22" |
| Spindle Speeds | 20 To 526 Rpm's |
| Spindle Hole | 9-1/4" |
| Spindle Nose | A-15 |
| Chuck Size | 24" 4-Jaw |
| Feeds Cross | .004 To .090 I.P.R. |
| Feeds Long. | .005 To .167 I.P.R. |
| Main Motor With Out Set | 50 Hp. |
| Flange Holders | 2 |
| Weight | 28,000 Lbs. |
| Floor Space Right To Left | 20' |
| Floor Space Front To Back | 7' |
| Machine Height | 80" |
| Coolant | Yes |
| Tool Post 4 Way On Front | Yes |
| Cross Sliding Rear Turret | Yes |
| Full Chip Pan And Coolant | Yes |
| Note: Machine Is On The Way In. It Will Be | |
| Cleaned, Painted And Cycled. | |
| Machine Apron And Rapid Traverses Will Be | |
| Reconditioned. New Feed And Rapid Shafts | |
| Condition | Very Good |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com