| Specification | Description |
|---|---|
| Swing Over Bed Ways | 47.24" |
| Swing Over Cross Slide | 31.5" |
| Max Length To Be Machined | 110" |
| Max Weight Between Centers | 12,000 Lbs. |
| Center Distance | 120" |
| Width Of Bed | 38.187" |
| Spindle Speeds (18) | 13 To 375 Rpm's |
| Spindle Hole | 18.1" |
| Spindle Nose | A-20 |
| Pitch Of Longitudinal Lead Screw | 4 TPI |
| Pitch Of Cross Feed Screw | 5 TPI |
| Maximum Travel Of Cross Slide | 24" |
| Maximum Travel Of Compound | 12" |
| Maximum Swivel Of Compound | +/- 90 Degrees |
| Chuck Size With 18.1" Hole Front | 40" 4-Jaw |
| Chuck Size With 18.1" Hole Rear | 40" 4-Jaw |
| Min. Chucking Diameter | 13.375" |
| Number Of Longitudinal & Cross Feeds | 32 |
| Feeds Long | .004 To .059 IPR |
| Feeds Cross | .002 To .03 IPR |
| Threads Inch (30) | 1-1/2 To 30 TPI |
| Threads Metric (56) | 1 To 120 MM |
| Threads Module (46) | 0.5 To 60MM |
| Threads Diametral (20) | 2 To 28 TPI |
| Rapid Traverse | 147 IPM |
| Tail Stock Quill Diameter | 6.3" |
| Tail Stock Quill Travel | 11.81" |
| Tail Stock Taper | # 6 Morse |
| Follow Rest | 2 To 8.66" |
| Steady Rest Roller Type | 8.66 " To 24.8" |
| Main Motor | 40 Hp. |
| Weight | 34,650 Lbs. |
| Machine Floor Space | 99" X 290" |
| Machine Height | 73" |
| Taper Attachment Travel | 31.5" |
| Inverter For Controlling Main Motor Speed | Yes |
| Thread Dial | Yes |
| Hardened & Ground Ways | Yes |
| Coolant System | Yes |
| 4-Way Tool Post | Yes |
| Steady Rest | Yes |
| Options: | |
| Air Kickout | $9,750.00 |
| Newall 2 Axis D.R.O. | $6,500.00 |
| Note: Machine Will Have North America Electric | |
| Motors. | |
| Condition | New |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com