| Specification | Description |
|---|---|
| Control | Fanuc OiTD 10.4 LCD |
| Swing Over Ways | 21.65" |
| Swing Over Cross Slide | 12.2" |
| Swing In Gap | 31.1" |
| Cross Travel X Axis | 11.81 |
| Cross Slide Travel Z Axis | 163" |
| Center Distance | 157" |
| Spindle Nose | A1-11 |
| Spindle Thru Hole Standard | 3.23 |
| Spindle Hole Option | 4.1" |
| Bar Capacity | 3.58" |
| Spindle Speeds | 80 To 2,400 Rpm's |
| Chuck Size Hydraulic | 12" 3-Jaw |
| Front Turret Standard LS-160 | Vertical 8 Stations |
| Rear Turret E4-160 | Horizontal 4 Stations |
| Turret Tooling For V 8 Stations | 1-1/4" X 1-1/4" |
| Cutting Feed Rate | .001 To .500 IPM |
| Rapid Traverse X Axis | .590 IPM |
| Rapid Traverse Z Axis | .590 IPM |
| Main Motor Continuous | 20/30 Hp. |
| Tail Stock Quill Diameter | 3.94" |
| Tail Stock Quill Stroke | 5.91" |
| Tail Stock Quill Taper | #5 Morse |
| Machine Length | 244" |
| Machine Width | 87.6" |
| Machine Height | 80.71" |
| Weight | 11,800 Lbs. |
| Manual Steady Rest | .790" To 7.87" |
| Manual Steady Rest | 5.91" To 11.81" |
| Hardened & Ground Ways | Yes |
| Hydraulic Tail Stock Quill | Yes |
| Coolant System | Yes |
| Chip Conveyor | Yes |
| Tooling Package | |
| Gib & Spacer Set | 8 Sets |
| Facing Tool Holder | 2 |
| Boring Holders | 3 |
| Sleeve (12,16,20,32,40 MM) | 1 pcs Each |
| Drill Sleeve ( MT2, MT3, MT4) | 1 pcs Each |
| Please Call For Price & Delivery | |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com