| Specification | Description |
|---|---|
| Control | Fanuc OiTD |
| Swing Over Ways | 23.62" |
| Swing Over Cross Slide | 17.72" |
| Cross Travel X Axis | 12.01" |
| Cross Slide Travel Z Axis | 49.21" |
| Center Distance | 49" |
| Spindle Nose | A-2-8 |
| Spindle Hole | 3.58" |
| Spindle Speeds | 2,500 Rpm's |
| Chuck Size Hydraulic | 12" 3-Jaw |
| Turret Station | 12 |
| Turret Square Tool Holders | 1" |
| Turret Boring Bar | 1.5" |
| Cutting Feed Rate | .001 To .500 IPM |
| Rapid Traverse X Axis | .590 IPM |
| Rapid Traverse Z Axis | .590 IPM |
| Main Motor Continuous | 30 / 40 Hp. |
| Tail Stock Quill Diameter | 4.72" |
| Tail Stock Quill Stroke | 5.91" |
| Tail Stock Quill Taper | #5 Morse |
| Machine Length | 161.97" |
| Machine Width | 95.39" |
| Machine Height | 79.37" |
| Weight | 15,873 Lbs. |
| Hardened & Ground Ways | Yes |
| Coolant System | Yes |
| Chip Conveyor | Yes |
| Tooling Package | |
| Gib & Spacer Set | 8 Sets |
| Facing Tool Holder | 2 |
| Boring Holders | 3 |
| Sleeve (12,16,20,32,40 MM) | 1 pcs Each |
| Drill Sleeve ( MT2, MT3, MT4) | 1 pcs Each |
| Please Call For Price & Delivery | |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com