| Specification | Description |
|---|---|
| Control | Fagor 8055 TC/A 11" LCD |
| Swing Over Cross Slide | 25.590 |
| Swing Over Ways | 21.65" |
| Swing In Gap | 16.1" |
| Cross Travel X Axis | 11.81 |
| Cross Slide Travel Z Axis | 124.5" |
| Center Distance | 120" |
| Spindle Nose Optional 3" Hole | A1-8 or D1-8 |
| Spindle Hole Standard | 3.2" |
| Bar Capacity Standard | 2.71 |
| Spindle Speeds Small Hole Standard | 80 To 3,500 Rpm's |
| Chuck Size Hydraulic | 12" 3-Jaw |
| Cutting Feed Rate | .001 To .500 IPM |
| Rapid Traverse X Axis | .590 IPM |
| Rapid Traverse Z Axis | .590 IPM |
| Main Motor Continuous | 15 / 20 Hp. |
| Tail Stock Quill Diameter | 3.93" |
| Tail Stock Quill Stroke | 5.91" |
| Tail Stock Quill Taper | #5 Morse |
| Machine Length | 166" |
| Machine Width | 87.6" |
| Machine Height | 80.71" |
| Weight | 14,220 Lbs. |
| Manual Steady Rest | .790" To 7.87" |
| Manual Steady Rest | 7" To 16" |
| Quick Change Tool Post & 6 Holders | Yes |
| Manual Tail Stock Quill | Yes |
| Hardened & Ground Ways | Yes |
| Coolant System | Yes |
| Chip Conveyor | Yes |
| Optional | Cost Subjest To Changes |
| Fanuc OITD 10.4 LCD | $3,250.00 |
| Optional Spindle | |
| Spindle Hole 4" Hole Speeds 80 To 2,400 Rpm's | 10,820.00 |
| Spindle Nose 4" Hole A1-11 or D1-11 | |
| Spindle Bar Capacity 3.58: | |
| Optional Horsepower | |
| 20 / 25 Hp | $5,175.00 |
| Spindle Spindle 80 TO 2,400 Rpm's | |
| Optional Turrets | |
| Front Turret Standard LS-160 Vertical 8 Stations | $7,550.00 |
| Rear Turret E4-160 Horizontal 4 Stations | $6,875.00 |
| Turret Tooling For V 8 Stations 1-1/4" X 1-1/4" | |
| Tooling Package | $1,550.00 |
| Gib & Spacer Set 8 Sets | |
| Facing Tool Holder 2 | |
| Boring Holders 3 | |
| Sleeve (12,16,20,32,40 MM) 1 pcs Each | |
| Drill Sleeve ( MT2, MT3, MT4) 1 pcs Each | |
| Please Call For Price & Delivery | |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com