36 Used Bullard (Cut Master) Vertical Turret Lathe


36" Used Bullard (Cut Master) Vertical Turret Lathe

Stock Number: B600677

Bullard 36" Cut Master

Condition: Good




Request A Quote On Our Stock Number: B600677 36 Used Bullard (Cut Master) Vertical Turret LatheRequest a quote on stock# B600677
SpecificationDescription
Chuck Size36" 3-Jaw
Swing Side Head Above Table36"
Height Under Rail30"
Swing Side Head Below Table38"
Table Speed4.9 T0 180 Rpm's
Feeds.004 To .500 I.P.R.
Feeds.003 To .333 I.P.R.
Main Motor30 Hp.
Turret Head Travel Left To Right19.5"
Turret Head Swivel30 Degrees
Turret Ram Head Turret Travel Up & Down34"
Turret Head Position5
Side Head Travel In & Out19"
Side Head Travel Up & Down34"
Weight30,000 Lbs.
Floor Space120" X 100"
Height120"
Power Elevation Of RailYes
Rapid Traverse To Both HeadYes
Built In 4 Way Tool Post On Side HeadYes
Floor ShiftYes
  
ConditionVery Good
  
  

Equipped With:
Note: Machine Will Be Cleaned, Painted And Cycled. All Feed And Rapid Shafts Seals Have Been Replaced. Hand Wheel Seals Have Been Replaced, Gear Boxes Have Been Cleaned And Checked. Hydraulics And Main Motor Have Been Reconditioned.


HomeIndexContact


36 Used Bullard (Cut Master) Vertical Turret Lathe
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com