17 X 60 Used Nardini. S.A.Engine Lathe


17" X 60" Used Nardini. S.A.Engine Lathe

Stock Number: L3000133

Nardini S.A. ND1760

Serial No. E5KDM042      Age: 2004

Condition: Good


                                         
Click to view larger photo

Request A Quote On Our Stock Number: L3000133 17 X 60 Used Nardini. S.A.Engine LatheRequest a quote on stock# L3000133
SpecificationDescription
Swing Over Bed Ways17"
Swing Over Cross Slide10-3/8"
Sing In Gap25"
Bed Way Width10-5/8"
Center Distance60"
Spindle Hole2-1/16"
Spindle Speeds25 To 2,000 Rpm's
Spindle NoseD1-6
Chuck Size12" 4-Jaw
Feeds (66) Inch.0033 To .0976 IPR
Feeds (66) Metric.084 To 2.479 IPR
Threads Inch (54)2-3/4" To 42 TPI
Threads Metric (54).40 To 18.472 MM
Metric Modules (54)).20 To 2.5
Diametral Pitches (54)8 To 44
Lead Screw Diameter & Pitch1-1/4" X 4 TPI
Tail Stock Quill Diameter2-1/4"
Tail Stock Quill Travel7-1/2"
Tail Stock Taper# 4 Morse
Main Motor8.5 Hp. 220 /440
Weight4,520 Lbs.
Floor Space40"W x 116" L
Machine Height52"
CoolantYes
Hardened & Ground Bed WaysYes
Taper AttachmentYes
Full Length Chip PanYes
  
Note: Machine Has Been Cleaned, Painted & Cycled. 
  
ConditionGood




HomeIndexContact


17 X 60 Used Nardini. S.A.Engine Lathe
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com