18 X 80 Jet Engine Lathe


18" X 80" Jet Engine Lathe

Stock Number: L3000206

Jet GX 1880 ZX

Serial No. 050X30ZX906

Condition: Good


                                                       
Click to view larger photo

Request A Quote On Our Stock Number: L3000206 18 X 80 Jet Engine LatheRequest a quote on stock# L3000206
SpecificationDescription
Swing Over Bed Ways18"
Swing Over Cross Slide11"
Swing In Gap27-1/2"
Length Of Gap12"
Center Distance80"
Spindle Hole3-1/8"
Spindle Speeds25 To 1,800 Rpm's
Spindle NoseD-1-8
Chuck Size12" 4 - Jaw
Chuck Size12" 3-Jaw
Feeds Longitudinal (122).0015 TO .0913IPR
Feeds Cross (122).0006 To .0365 IPR
Threads Inch (61)1-5/8 To 72 TPI
Threads Metric (24).05 To 20 MM
Compound Travel5-1/8"
Cross Slide Travel9"
Tail Stock Quill Diameter3"
Tail Stock Quill Travel5"
Tail Stock Taper# 5 Morse
Main Motor7.5 Hp 230/ 460
Weight6,590 Lbs
Machine Floor Space Length / Width140" X 40"
Machine Height50"
CoolantYes
Hardened & Ground Bed WaysYes
Taper AttachmentYes
Full Length Splash GuardYes
Gear HeadYes
  
Note: Machine Has Been Cleaned,Painted & Cycled. 
  
ConditionGood

Equipped With:
The ZX-Series Large Spindle Bore Lathe provides power, precision, efficiency and reliability to your metal shop. A one piece cast iron base absorbs vibrations during operation to allow heavier cuts and ensure accuracy, while the Universal Gearbox eliminates the need to change gears. Features you've come to expect. Features: 3-1/8" bore spindle is supported by two tapered and one ball bearings Chrome molybdenum headstock gears are hardened, ground and shaved Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces T-slotted compound slide featuring four-way tool post One piece cast iron base absorbs vibration allowing heavier cuts High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground Removable gap allows large diameter work Five position automatic carriage stop increases productivity Attractive chrome levers, dials and knobs complete this impressive package Meehanite Castings


HomeIndexContact


18 X 80 Jet Engine Lathe
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com