5 A Used Warner & Swasey Square Head Saddle Type Turret Lathe


5 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

Stock Number: L630413

Warner & Swasey 5A -3600 Lot 863

Serial No. 3051247      Age: 1981

Condition: Very Good




Request A Quote On Our Stock Number: L630413 5 A Used Warner & Swasey Square Head Saddle Type Turret LatheRequest a quote on stock# L630413
SpecificationDescription
Swing Over Bed Ways36"
Swing Over Cross Slide Carriage32-3/4"
Center Distance141"
Spindle Hole12"
Spindle Speeds10 To 281 Rpm's
Spindle NoseA-20
Chuck Size32" 4-Jaw New
Feeds Cross.0035 To .167 I.P.R.
Feeds Long..005 To .167 I.P.R.
Threading Full Length1 To 36 TPI
Main Motor75/37.5 Hp.
Flange Holders5
Floor Space265" X 89"
Machine Height89"
Weight26,000 Lbs.
CoolantYes
Tool Post 4 Way On FrontYes
Rapid Traverse Front And RearYes
Cross Sliding Rear TurretYes
  
Condition: Good 

Equipped With:
Note: Machine Will Have Front & Rear Aprons And Rapid Traverse Box Reconditioned. Rapid Traverse Drive Box Reconditioned, New Bearings, In Main Motor. New Feed And Rapid Shafts. Headstock Cleaned And Flushed, New Filters And Oil. New Lockdown Pin And Bushing In Hex And Square Turrets, New Nut And Screw In Cross Slide And Hex Turret. Gibs Reworked And Refitted. New 24"4-Jaw Gator Chuck W/ Reconditioning. Machine Will Be Cleaned, Painted And Cycled. Machine May Be Seen Under Power With Proper Notice.


HomeIndexContact


5 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com