4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe


4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

Stock Number: L630418

Warner & Swasey 4A - 3550 Lot 41

Serial No. 2158095      Age: 1966

Condition: Very Good


                                                                     
Click to view larger photo

Request A Quote On Our Stock Number: L630418 4 A Used Warner & Swasey Square Head Saddle Type Turret LatheRequest a quote on stock# L630418
SpecificationDescription
Swing Over Bed Ways28-1/4"
Swing Over Cross Slide Carriage22"
Center Distance124"
Center Distance Spindle Nose To Turret Face144"
Spindle Hole9-1/4"
Spindle Speeds20 To 526 Rpm's
Spindle NoseA-15
Chuck Size24" 3-Jaw
Chuck Size (New Gator Heavy Duty Not Pictured)25" 4-Jaw
Feeds Cross.0035 To .167 I.P.R.
Feeds Long..005 To .167 I.P.R.
Main Motor75 / 37.5 Hp.
Flange Holders5
Side Tool Holder1
Weight24,000 Lbs.
Floor Space22' X 7'
Height80"
CoolantYes
Tool Post 4 Way On FrontYes
Cross Sliding Rear TurretYes
Rapid Traverse Front & Rear CarriagesYes
Power Wrench ChuckYes
Taper Attachment Rear ApronYes
ConditionVery Good
  

Equipped With:
Note: Machine Will Have Front & Rear Aprons And Rapid Traverse Box Reconditioned. Rapid Traverse Drive Box Reconditioned, New Bearings, In Main Motor. New Feed And Rapid Shafts. Headstock Cleaned And Flushed, New Filters And Oil. New Lockdown Pin And Bushing In Hex And Square Turrets, New Nut And Screw In Cross Slide And Hex Turret. Gibs Reworked And Refitted. New 24"4-Jaw Gator Chuck W/ Reconditioning. Machine Will Be Cleaned, Painted And Cycled. Machine May Be Seen Under Power With Proper Notice.


HomeIndexContact


4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com