4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe


4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

Stock Number: L630426

Warner & Swasey 4A - 3550 Lot 679

Serial No. 2646633      Age: 1975

Condition: Very Good




Request A Quote On Our Stock Number: L630426 4 A Used Warner & Swasey Square Head Saddle Type Turret LatheRequest a quote on stock# L630426
SpecificationDescription
Swing Over Bed Ways28-1/4"
Swing Over Cross Slide Carriage22"
Center Distance62"
Spindle Hole9-1/4"
Spindle Speeds20 To 526 Rpm's
Spindle NoseA-15
Chuck Size (New Heavy Duty)24" 4- Jaw New Gator
Feeds Cross.004 To .090 I.P.R.
Feeds Long..005 To .167 I.P.R.
Main Motor30/60 Hp.
Flange Holders4
Slide Tools2
Weight24,000 Lbs
Floor Space Right To Left20'
Floor Space Front To Back7'
Machine Height80"
CoolantYes
Tool Post 4 Way On FrontYes
Rapid Traverse Front And RearYes
Cross Sliding Rear TurretYes
Front And Rear Taper AttachmentsYes
Full Chip Pan And CoolantYes
  
ConditionVery Good
  

Equipped With:
Note: Machine Will Have Front & Rear Aprons And Rapid Traverse Box Reconditioned. Rapid Traverse Drive Box Reconditioned, New Bearings, In Main Motor. New Feed And Rapid Shafts. Headstock Cleaned And Flushed, New Filters And Oil. New Lockdown Pin And Bushing In Hex And Square Turrets, New Nut And Screw In Cross Slide And Hex Turret. Gibs Reworked And Refitted. New 24"4-Jaw Gator Chuck W/ Reconditioning. Machine Will Be Cleaned, Painted And Cycled. Machine May Be Seen Under Power With Proper Notice.


HomeIndexContact


4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com