4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe


4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

Stock Number: L630442

Warner & Swasey 4A - 3580 Lot 4B

Serial No. 1563331      Age: 1957

Condition: Very Good




Request A Quote On Our Stock Number: L630442 4 A Used Warner & Swasey Square Head Saddle Type Turret LatheRequest a quote on stock# L630442
SpecificationDescription
Swing Over Bed Ways28-1/4"
Swing Over Cross Slide Carriage22"
Spindle Hole12-1/2
Center Distance62"
Spindle Speeds20 To 526 Rpm's
Spindle NoseA-15
Chuck Size (New Heavy Duty)24" 4 Jaw New Gator
Feeds Cross.004 To .090 I.P.R.
Feeds Long..005 To .167 I.P.R.
Threading Front & Rear1-36 TPI
Main Motor60/30 Hp
Weight22,000 Lbs.
Floor Space Right To Left20'
Floor Space Front To Back7'
Machine Height80"
Short Flange Holder2
Long Flange Holders1
Taper Attachment On Rear TurretYes
CoolantYes
Tool Post 4 Way On FrontYes
Cross Sliding Rear TurretYes
Full Chip Pan And CoolantYes
RapidsYes
  
ConditionVery Good
  

Equipped With:
Note: Machine Will Have Front & Rear Aprons And Rapid Traverse Box Reconditioned. Rapid Traverse Drive Box Reconditioned, New Bearings, In Main Motor. New Feed And Rapid Shafts. Headstock Cleaned And Flushed, New Filters And Oil. New Lockdown Pin And Bushing In Hex And Square Turrets, New Nut And Screw In Cross Slide And Hex Turret. Gibs Reworked And Refitted. New 24"4-Jaw Gator Chuck W/ Reconditioning. Machine Will Be Cleaned, Painted And Cycled. Machine May Be Seen Under Power With Proper Notice.


HomeIndexContact


4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com