3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe


3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

Stock Number: L630459

Warner & Swasey 3500 lot

Serial No. 1510749      Age: 1956

Condition: Very Good




Request A Quote On Our Stock Number: L630459 3 A Used Warner & Swasey Square Head Saddle Type Turret LatheRequest a quote on stock# L630459
SpecificationDescription
Swing Over Bed Ways23-1/2"
Swing Over Cross Slide Carriage18"
Center Distance43"
Spindle Hole4-3/4"
Spindle Speeds12 To 851 Rpm's
Spindle NoseA-11
Chuck Size (Not Pictured)21" 4 - Jaw New
Feeds Cross.0025 To .082 I.P.R.
Feeds Long..005 To .167 I.P.R.
Main Motor40/20 Hp. 480 Volts
Flange Holders4
Weight15,000 Lbs.
Floor Space180" L. X 83" W.
Machine Height64"
CoolantYes
Tool Post 4 Way On FrontYes
Rapid Traverse Front And RearYes
Fixed Rear TurretYes
Slide Tool Holders2
  
ConditionVery Good
  
Price Prior To Reconditioning: 
  
Price After Reconditioning: 

Equipped With:
Note: Machine Will Have Front & Rear Aprons And Rapid Traverse Box Reconditioned. Rapid Traverse Drive Box Reconditioned, New Bearings, In Main Motor. New Feed And Rapid Shafts. Headstock Cleaned And Flushed, New Filters And Oil. New Lockdown Pin And Bushing In Hex And Square Turrets, New Nut And Screw In Cross Slide And Hex Turret. Gibs Reworked And Refitted. New 20"4-Jaw Gator Chuck W/ Reconditioning. Machine Will Be Cleaned, Painted And Cycled. Machine May Be Seen Under Power With Proper Notice.


HomeIndexContact


3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com