3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe


3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

Stock Number: L630465

Warner & Swasey 3500 Lot 9

Serial No. 1499463      Age: 1955

Condition: Good


                           
Click to view larger photo

Request A Quote On Our Stock Number: L630465 3 A Used Warner & Swasey Square Head Saddle Type Turret LatheRequest a quote on stock# L630465
SpecificationDescription
Swing Over Bed Ways23-1/2"
Swing Over Cross Slide Carriage18"
Center Distance43"
Spindle Hole4-3/4"
Spindle Speeds12 To 851 Rpm's
Spindle NoseA-15
Chuck Size New Gator21" 4- Jaw
Feeds Cross.0025 To .082 I.P.R.
Feeds Long..005 To .167 I.P.R.
Main Motor20/40 Hp
Flange Holders4
Slide Tool Holder1
Weight15,000 Lbs.
Floor Space180" L. X 83" W.
Machine Height64"
CoolantYes
Taper On Front apronYes
Tool Post 4 Way On FrontYes
Rapid Traverse Front And RearYes
Fixed Rear TurretYes
  
ConditionGood
  

Equipped With:
Note: Machine Will Have Front & Rear Aprons And Rapid Traverse Box Reconditioned. Rapid Traverse Drive Box Reconditioned, New Bearings, In Main Motor. New Feed And Rapid Shafts. Headstock Cleaned And Flushed, New Filters And Oil. New Lockdown Pin And Bushing In Hex And Square Turrets, New Nut And Screw In Cross Slide And Hex Turret. Gibs Reworked And Refitted. New 20"4-Jaw Gator Chuck W/ Reconditioning. Machine Will Be Cleaned, Painted And Cycled. Machine May Be Seen Under Power With Proper Notice.


HomeIndexContact


3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com