10 X 50 Used Kent Vertical Knee Mill


10" X 50" Used Kent Vertical Knee Mill

Stock Number: M282451

Kent KTM 3 VK

Serial No. 90364      Age: 1990


                           
Click to view larger photo

Request A Quote On Our Stock Number: M282451 10 X 50 Used Kent Vertical Knee MillRequest a quote on stock# M282451
SpecificationDescription
Table Size10" X 50"
Table Weight Capacity946 Lbs
T-Slots On Table3
T-Slot Size5/8"
Spindle TaperR- 8
Spindle Speeds Low60 To 500 Rpm's
Spindle Speeds Variable High60 To 4,200 Rpm's
Spindle Feeds.001 To .003 I.P.R.
Spindle Quill Travel5"
Spindle Tilt+/- 45 Degrees
Spindle Swivel+/- 90 Degrees
Spindle To Table Min. / Max1-5/8" To 16-1/2"
Spindle Centerline To Column Min. / Max4" To 25-5/8"
Saddle Travel In & Out15-3/4"
Table Travel Longitudinal30-3/4"
Knee Travel15"
Table Feeds Variable0 To .250 I.P R.
Over Arm Travel In And Out21-5/8"
Over Arm Swivel360 Degrees
Main Motor3 Hp.
Weight3,350 Lbs.
Floor Space Right To Left72"
Floor Space Front To Back72"
Height96"
Power Feed On TableYes
Power Draw BarYes
6" RiserYes
  
Note: Machine Has Been Cleaned, Painted & Cycled. 
Machine May Be Seen Under Power With Proper 
Notice 
  
ConditionGood
  




HomeIndexContact


10 X 50 Used Kent Vertical Knee Mill
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com