Specification | Description |
---|---|
Control | Fanuc |
Spindle Size | 4.3 |
Spindle Taper | Cat #50 |
Automatic Tool Changer | 60 ATC |
Spindle Speeds | 10 To 2,500 Rpm's |
Spindle Travel W Axis | 20" |
Spindle Head Travel Up & Down Y Axis | 70.8" |
ColumnTravel In & Out Z Axis | 66.9" |
Rotary Table Size | 62.9" X 70.86" |
B Axis Feed / Rapid Traverse Rate | 1 Deg.To 360 Deg. |
Table Load | 17,600 Lbs. |
Table Travel Cross X Axis | 100" |
Main Motor | 30 /40 Hp. |
Feeds X, Y, Z | .001 To |
Rapid Traverse Rate X, Y, Z | .393 Min. |
Dimensions | 224" L X 259" W |
Height | 181" |
Weight | 49,604 Lbs. |
Linear Scales | X, Y, Z, Axis |
Box Ways | X & Y Axis |
Schneeberger Roller Type Linear Guide Ways | |
Featuring 12 Blocks | Z Axis |
Safeguarding Located At Rear Of Column | Yes |
Coolant Thru Spindle 300 PSI | Yes |
Electric And Wiring Prepparation For CTS | Yes |
Table Guards For CTS System | Yes |
Heat Exchanger | Yes |
Air Conditioner | Yes |
Table Guards Around Table | Yes |
Telescopic Way Cover For Sub Supporter Guideways | Yes |
Auto Power Off | Yes |
Chip Auger For Table & Chip Conveyor | Yes |
Coolant | Yes |
Hydraulic System | Yes |
Auto Lubrication System | Yes |
RS 232 | Yes |
Heat Exchanger | Yes |
Spindle Oil Cooler | Yes |
Work Lamp | Yes |
Safety Module | Yes |
EMC | Yes |
Machining Leveling Pads | Yes |
Operator Manuals | Yes |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com