Request a quote on stock# NL300025| Specification | Description |
|---|---|
| Swing Over Bed Ways | 26" |
| Swing Over Cross Slide | 18-1/16" |
| Swing In Gap | 33-1/4" |
| Length Of Gap In Front Of Faceplate | 6-1/2" |
| Bedway Width | 16-1/8" |
| Center Distance | 120" |
| Spindle Hole | 4.12" |
| Spindle Speeds | 15 To 1,200 Rpm's |
| Spindle Nose | D-1-11 |
| Spindle Weight Capacity Chuck Only | 660 Lbs. |
| Spindle Weight Capacity With Chuck &Tail Stock | 1,650 Lbs. |
| Spindle Weight Capacity Tail Stock & Steady Rest | 3,300 Lbs. |
| Chuck Size | 20" 3-Jaw |
| Chuck Size | 20" 4-Jaw |
| Face Plate | 20" |
| Cross Slide Travel | 14.96" |
| Cross Slide Width | 7-3/32" |
| Compound Travel | 10" |
| Compound Width | 4-11/32" |
| Feeds Cross | 0.0014 To 0387 I.P.R. |
| Feeds Long | .0014 To .01935 I.P.R. |
| Threads Inch | 2 To 112 T.P.I. |
| Threads Metric | 0.2 To 14 MM |
| D.P. | 4 To 112 T.P.I. |
| Module | .02 To 7 MP |
| Tail Stock Quill Diameter | 2-5/16" |
| Tail Stock Quill Travel | 6-5/16 |
| Tail Stock Taper | # 5 Morse |
| Main Motor | 15 Hp. 220 / 440/ |
| Weight | 7,474 Lbs. |
| Machine Dimension | 180" L X 51" W |
| Machine Height | 54" |
| Standard Steady Rest | 4.3" To 11" |
| Steady Rest | 3" To 8" |
| Steady Rest | 8" To 15" |
| Rapid Traverse | Yes |
| Foot Brake | Yes |
| Coolant Pan & Back Splash Guard | Yes |
| Thread Dial | Yes |
| Hardened And Ground Ways | Yes |
| Follow Rest | Yes |
| Telescopic Taper Attachment | Yes |
| Newall 2 Axis D.R.O. | Yes |
| ALoris Type Tool Post And 5 Tool Holders | Yes |
| Condition | New |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com