40 X 480 Maxcut PA Series Heavy Duty Lathes

40" X 480" Maxcut PA Series Heavy Duty Lathes

Stock Number: NL300041

Model: PA40480

Click to view larger photo

Request A Quote On Our Stock Number: NL300041 40 X 480 Maxcut PA Series Heavy Duty LathesRequest a quote on stock# NL300041
Swing Over Bed Ways39.76"
Swing Over Cross Slide29.33"
Swing In Gap57.87"
Length Of Gap23.62"
Bed Way Width25.98"
Center Distance480
Load Between Centers Without Steady Rest7,700 Lbs.
Load Between Centers With Steady Rest9,900 Lbs.
Spindle Hole6"
Compound Rest Travel17.7"
Cross Slide Travel23.67"
4=Way Tool Post Width8.07"
Spindle Speeds (18 Steps)7 To 700 Rpm's
Spindle NoseA2-11
Spindle Taper# 5 Morse
Chuck Size32" 3-Jaw
Chuck Size (One Piece Jaw Type)32" 4-Jaw
Feeds Cross.0009 To .05 IPR
Feeds Long.0018 To .1 IPR
Threads Inch (60)1/2 To 28 TPI
Threads Metric (60)1 To 56 MM
D.P. (60)1 To112 MM
Module (60).025 To 14 TPI
Lead Screw Pitch2 TPI
Rapid Traverse Longitudinal78.74 IPM
Rapid Traverse Cross50 IPM
Tail Stock Quill Diameter4.52"
Tail Stock Quill Travel7.87"
Tail Stock Taper# 6 Morse
Steady Rest Roller Type18"
Steady Rest Roller Type (2)25"
Main Motor30 Hp.
Weight26,500 Lbs.
Machine Dimension Length X Width565"L X 72" W
Machine Height72"
4- Way Rapid TraverseYes
Coolant PanYes
Thread DialYes
Hardened And Ground WaysYes
Standard Steady RestYes
Follow RestYes
Telescopic Taper AttachmentYes
2 Axis DROYes
Photos Shows Optional Chip Conveyor 

Equipped With:
One piece bed, floor type casting. 2 shear bed way with extra way supporting the apron. All ways are hardened and ground. Alloy steel spindle with opposed taper roller bearings. Hardened and ground gears, shafts and cross slide ways 18-speed geared headstock. Electromagnetic spindle brake. 6-way rapid traverse and power feed to top slide. Totally enclosed universal inch / metric gear box. Carriage position device. Dual voltage spindle motor, 30 HP. Electromagnetic spindle brake. Standard Accessories: Thread chasing dial. 2-speed tailstock quill (manual) 1 dead center, MT #6 . Coolant pump. Work lamp. Follow type splash guard. One piece stainless steel leadscrew cover. Water and oil collection plate unnder apron. Rear side chip and water collection plate.


40 X 480 Maxcut PA Series Heavy Duty Lathes
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679

Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers