24.4 X 50 MaxCut Eumach  CNC Vertical Machining Center


24.4" X 50" MaxCut Eumach CNC Vertical Machining Center

Stock Number: NM018516

Max Cut VMC 1300


             
Click to view larger photo

Request A Quote On Our Stock Number: NM018516 24.4 X 50 MaxCut Eumach  CNC Vertical Machining CenterRequest a quote on stock# NM018516
SpecificationDescription
ControlFagor 8055 I
  
Table Size24.4" X 50"
Table Height35.2"
Table Load2,650 Lbs.
Travel Y Axis50"
Travels X Axis25"
Travel Z Axis24"
Spindle Taper# 50
Spindle Bearing Inside Diameter3.54"
Spindle Speed6,000 Rpm's
Spindle Center To Column25.9"
Spindle Nose To Table Top4.3" To 28.3"
Spindle Motor15/20 Hp.
X Axis Motor14.84 Nm
Y Axis Motor14.84 Nm
Z Axis Motor27.34 Nm
Coolant Motor3/4 Hp.
Feed Rate X/Y/Z600 IPM
Rapid Rate X/Y/Z1000 IPM
Positioning Accuracy+/- .015 MM
Repeatability+/- .01 MM
Number Of Tools24
Tool Select By Shortest PathBi-Directional
Max. Tool Weight33 Lbs.
Max. Tool Diameter4.9"
Max. Tool Diameter (Adjacent Pocket)2.76"
Max. Tool Length11.81"
Machine Length X Width132" X 100"
Machine Height112"
Machine Weight18,700 Lbs.
Floor Space207" X 128"
55 Gallon Coolant TankYes
Coolant Thru SpindleYes
Chip Auger And BucketYes
Rigid TappingYes
Wash Down SystemYes
Portable MPGYes
Large Fully Ground Work TableYes
Precision Ground Ball ScrewYes
Heavily Ribbed Cast Iron ComponentsYes
One Piece Box Base With Internal DesignYes
Heavy Duty Box WaysYes
Telescopic Way CoversYes
Heat ExchangerYes
Automatic Lubrication W/Low Lubrication FaultYes
Low Voltage Circuit SystemYes

Equipped With:
Quick programming of helical taper interpolation or helical threading Inside/outside taper boring cycle Solid box ways (4 on the Y-axis) Rigid tapping 20bar Coolant through the spindle full enclosure with removable side doors belt type lift-up chip conveyor portable Manual pulse generator (electronic hand wheel) Warranty: NEW EQUIPMENT: 2 year Parts 2 years on Control Travel & accommodations and labor extra cost. All electrics warranted by manufacturer. All parts are FOB Vancouver unless otherwise specified. All shipments are by ground transport. Fuses, wipers, and other normal wear items are not covered under this warranty. NOTE: All specifications are approximate, and are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one our sales people know so that the error can be changed. Prices shown are in US funds. Delivery to be confirmed at the time of purchase. The above pricing is F.O.B. Masteel in Mississauga/Oakville, Ontario. Any applicable taxes are extra. The payment terms are 30% with order, 60% on delivery and 10% 30 days after delivery. Warranty is two (2) years on parts & labour. It is the customers responsibility to uncrate and unload the machine, place it in the final destination on the floor and connect it to the electric power supply by a licensed electrician. Hydraulic and way lube oil will also be provided by the customer. On completion a Masteel service/installation technician will level and start up the machine and provide operator training. Conversational programming training will be provided by Masteel/Fagor. This proposal is valid for thirty (30) days.


HomeIndexContact


24.4 X 50 MaxCut Eumach  CNC Vertical Machining Center
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com