13X18 Wells Horizontal Type Saw

13"X18" Wells Horizontal Type Saw

Stock Number: NS0653010

Wells 1318

Condition: New

Click to view larger photo

Request A Quote On Our Stock Number: NS0653010 13X18 Wells Horizontal Type SawRequest a quote on stock# NS0653010
Maximum Capacity Round13"
Maximum Capacity Flat18"
Rectangular13" X 18"
Maximum Capacity @ 45 Degrees11" X 9-1/2"
Work Height29"
Blade Size1" X 12'6"X.035
Blade Speed70 To 375 SFPM
Blade Wheel Size15"
Main Motor3 Hp
Weight955 Lbs
Floor Space40" W X 84" L
Machine Height40"
Feed ControlsVariable Hyd. Counter Balance
Carbide Guides With RollersYes
Coolant 8 GallonYes
Discharge TableNo

Equipped With:
Features Pushbutton control of sawing down feed Fully adjustable counterbalance spring to control weight of saw frame Variable Hydraulic Feed Rate Control Spring loaded Carbide Guides with Rollers Combination Blade Drive: Reduction Gearbox and Perimeter Ring & Pinion Baldor® Motor 3 HP Motor 3 Phase TEFC 2 HP Single Phase ODP Infinitely Variable Blade Speeds Rite-Tension® Blade Tensioning Device Wet Cutting System Powered Blade Brush 110 Volts at Controls Overload and Under voltage Protection Precision Ground Bed and Vise Jaws Quick Acting Vise Adjustable Stock Stop Auto Shut-Off at End of Cut OSHA Blade Guarding Tiger-Tooth® Bi-Metal Blade Coolant for Initial Start-Up Optional Features for consideration: 5 ft. x 18" Infeed Roller Conveyor, 3,300 lb. capacity $612.00 10 ft. x 18" Infeed Roller Conveyor, 3,300 lb. capacity $1108.00 Blade Break / Stall Switch $747.00 Work Light with 250va transformer $196.00 Flush Hose Kit (w/ hi-output pump) $298.00 Casters, set of four (2 locking) $186.00 Fused Disconnect Lever Type NEMA Type 1 enclosure $648.00 OR Fused Disconnect Rotary Type NFPA/ NEMA 12 Enclosure $846.00 Micro Lubricant System $906.00 Oil for Micro Lubricant System - 1 gallon $71.00 Tiger Tooth Bi-Metal Blades. Set of six (6) $483.00 Chip Conveyor, Shuttle type $614.00 Leveling / Vibration Mounts $91.00 Overhead Bundle Clamp Air Powered contact factory Laser Line Pointer $711.00 Mid-Duty Stock Stand, 18" wide roller, 250# capacity $181.00 Heavy-Duty Stock Stand: 6" wide roller, 1000# capacity $427.00 12" wide roller, 1000# capacity $457.00 20" x 4 ft. Discharge Table $715.00 Freight Quote Disclaimer. Please read. These policies are controlled by the carrier not by Wellsaw. Unless specified in the quote, Freight is quoted only for the item(s) at the time of the request. If your customer changes or adds options to the order this quote is no longer valid. This quote is valid for 30 days. This freight quote is based upon shipment to a BUSINESS location in the ZIP code provided. The carrier assumes that the business has a loading dock and fork truck to unload the package. There will be additional charges if the carrier determines that the ship-to location is Non-Commercial, also referred to as "residential" or "farm". There will also be additional fees for: no dock lift gate services advance-notice phone calls delivery to schools, training centers, church or government offices delivery to location needing an appointment and/or escort such as: military facility, secure commercial facility (i.e. large mill or plant) OSHA STATEMENT Wellsaw band saw machines meet the OSHA safety standards that are in effect as of the time of this writing. Compliance with OSHA requirements is the legal responsibility of the user. All Wellsaw band saws now include as standard equipment, blade guards, low voltage protected switches with automatic cut-off at the completion of a cut, enclosed belt and pulley guards and grounded electrical features. WARRANTY POLICY WARRANTY PERIOD: One year from the date of purchase. Wellsaw band saws are warranted against defects in material or workmanship installed or performed at our factory. Within the warranty period we will, free of charge, at our option, either repair or replace any part which our examination discloses to be defective because of workmanship or defect in the material. This warranty does not apply if the machine or part has been used in a manner inconsistent with its design or which has been subject to accident, alteration, abuse or misuse or which fails due to lack of care or is the result of improper power supply and specifically does not apply to normal wear. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. Wellsaw shall not be liable of consequential or incidental damages suffered or incurred with respect to defective materials or workmanship. We do not authorize any person or representative to make any other warranty or to assume for us any liability in connection with the sale of our products other than those contained herein. Any agreements outside of or contradictory to the foregoing shall be void and of no effect. All transportation costs on products or parts submitted to Wellsaw under this warranty must be paid by the user. No products or parts are to be returned without first obtaining permission


13X18 Wells Horizontal Type Saw
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679

Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers