Request a quote on stock# NS065312| Specification | Description |
|---|---|
| CNC Programmable Controller With Digital Membrane | |
| Screen. | |
| Machine Diagnostics & Programming Prompting | |
| Maximum Capacity Round | 16" |
| Maximum Capacity Flat | 18" |
| Maximum Capacity @ 90 Degrees | 16" H X 18" W |
| Work Table Height | 35" |
| Blade Size | 15' X 1-1/4"X.042 |
| Blade Speed | 60-425 SFPM |
| Blade Band Wheel Size | 20" |
| Sawing Force | 30 To 120 Lbs. |
| Saw Weight Capacity | 5,000 Lbs |
| Main Motor | 7-1/2" Hp. |
| Weight | 3,250 Lbs. |
| Motor Hydraulic | 3/4 Hp. |
| Floor Space | 90' Wide X 93" Deep |
| Machine Height | 86" |
| Bar Feed Projection Hydraulic CNC Controlled | 0 To 25" |
| Shuttle Indexes (Automatic Calculated) | 20+ |
| Job Selection | 99 |
| Blade Break / Stall Switch | Yes |
| Automatic Kerf Compensation | Yes |
| Power Down | Yes |
| Manual Blade Tension | Yes |
| Coolant 15 Gallon | Yes |
| Roller Guide With Carbide Insert | Yes |
| Air Vise (8-1/2" Height) | Yes |
| Discharge Table | Yes |
| Built In Forklift Pockets | Yes |
| Optional Equipment for the Above System: | |
| Discharge Worktable 20" W x 48" L | $1,965.00 |
| Work Light Wired in | $295.00 |
| Air Hold -Down Saw & Bar Feed Vise | $4,120.00 |
| Blade Break/Stall Switch | $445.00 |
| Chip Conveyor, Electric Auger Style | $4,215.00 |
| 18" x 5' x 2500 Lbs. Cap Distributed Weight | $645.00 |
| 18" x 10' x 5000 Lbs. Cap Distributed Weight | $1,110.00 |
| 21" x 5' x 5000 Lbs. Cap Distributed Weight | $1,185.00 |
| 21" x 10' x 10,000 Lbs. Cap Distributed Weight | $2,145.00 |
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com